It is currently Thu Oct 19, 2017 12:51 pm

All times are UTC




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Safely Remove 4.0 Identifies My TEAC External USB Floppy as My Internal HDD (C:)
PostPosted: Wed May 20, 2009 8:02 pm 
Offline

Joined: Wed May 20, 2009 7:42 pm
Posts: 1
Safely Remove 4.0.6.720 identifies my TEAC external USB Floppy Drive as my internal HDD (Local Drive C:).
The 'Device Name' is correctly identified, but all the Properties identify my internal HDD (Local Drive C:).

My WinXP SP2 'My Computer' correctly identifies the external floppy as Drive A: and the FDD functions properly, as does the Local HDD Drive C:.

Here is the Tech Information:
Sys_DeviceDescription: TEAC USB Floppy
Sys_LocationInformation:
Sys_DeviceInstance: 45068
Sys_DevicePnPName: USB\VID_0644&PID_0000\7&2F0E7CF0&0&5
Sys_FriendlyName: TEAC FD-05PUW USB Device
Sys_HardwareID:
Sys_DriveLetter: C:
Sys_VolumeLabel: Local Drive
Sys_ulProblemNumber: 0
Sys_BusType: BusTypeUsb
Internal_DontShowThisDevice: False
Internal_IgnoreStopAllCommand: False
Internal_ImageName: USB disk
Internal_Hotkey:
Internal_UserDeviceName: TEAC FD-05PUW USB Device
Internal_UserDeviceNameWithDriveLetters: TEAC FD-05PUW USB Device (C:)
Internal_IsCardReader: False
Internal_IsProbablyFixedDrive: False
Internal_DeviceIsDisabled: False
Internal_DeviceIsSafelyRemoved: False
Internal_DeviceWasDisabledByProgram: False
Sys_VolumesList:
#UniqueVolume number 1
VolumeName: \\?\Volume{9b40f05a-e693-11da-8729-806d6172696f}\
VolumeMountPoints: C:
VolumeInformation: VolumeLabel = Local Drive
VolumeSerialNo = $CCA6B0D9
MaxComponentLength = 255
FileSystemFlags = $700FF
FileSystemName = NTFS
debugGetVolumeInformationExecTime(Ticks) = 0
FriendlyName: TEAC FD-05PUW USB Device
MediaType: 12
###
Internal_PhysicalDeviceLink:
------- Physical Device, level 1 ------
DeviceInst=45068
PnPName=USB\VID_0644&PID_0000\7&2F0E7CF0&0&5
FriendlyName=
DEVICEDESC=TEAC USB Floppy
LOCATION_INFORMATION=
HARDWAREID=
SPDRP_CLASSGUID={36FC9E60-C465-11CF-8056-444553540000}
ParentDeviceInst=7576
ParentDevicePnPName=USB\VID_2001&PID_F103\6&5F5A822&0&1
ulStatus=$0180600A
ulProblemNumber=0
Capabilities=$00000004
DN_REMOVABLE_Flag=True
DN_DISABLEABLE_Flag=True
DN_WILL_BE_REMOVED_Flag=False
DN_HAS_PROBLEM_Flag=False
DN_LIAR_Flag=False
CM_DEVCAP_SURPRISEREMOVALOK_Flag=False
CM_DEVCAP_DOCKDEVICE_Flag=False
CM_DEVCAP_REMOVABLE_Flag=True
CM_PROB_DEVICE_NOT_THERE_Flag=False
SPDRP_PHYSICAL_DEVICE_OBJECT_NAME=\Device\USBPDO-12
SPDRP_UI_NUMBER=0
BusType=BusTypeUsb
DeviceType=Unknown device type (0)
DeviceNumber=0
------- Physical Device, level 2 ------
DeviceInst=51544
PnPName=USBSTOR\SFLOPPY&VEN_TEAC&PROD_FD-05PUW&REV_3000\8&AF65C2F&0
FriendlyName=TEAC FD-05PUW USB Device
DEVICEDESC=
LOCATION_INFORMATION=
HARDWAREID=
SPDRP_CLASSGUID={4D36E980-E325-11CE-BFC1-08002BE10318}
ParentDeviceInst=45068
ParentDevicePnPName=USB\VID_0644&PID_0000\7&2F0E7CF0&0&5
ulStatus=$0180200A
ulProblemNumber=0
Capabilities=$00000000
DN_REMOVABLE_Flag=False
DN_DISABLEABLE_Flag=True
DN_WILL_BE_REMOVED_Flag=False
DN_HAS_PROBLEM_Flag=False
DN_LIAR_Flag=False
CM_DEVCAP_SURPRISEREMOVALOK_Flag=False
CM_DEVCAP_DOCKDEVICE_Flag=False
CM_DEVCAP_REMOVABLE_Flag=False
CM_PROB_DEVICE_NOT_THERE_Flag=False
SPDRP_PHYSICAL_DEVICE_OBJECT_NAME=\Device\000000bd
SPDRP_UI_NUMBER=0
BusType=BusTypeUsb
DeviceType=FILE_DEVICE_DISK
DeviceNumber=0
DevicePath#0=\\?\usbstor#sfloppy&ven_teac&prod_fd-05puw&rev_3000#8&af65c2f&0#{53f56311-b6bf-11d0-94f2-00a0c91efb8b}
MountPoints=C:


Top
 Profile  
 
 Post subject: Re: Safely Remove 4.0 Identifies My TEAC External USB Floppy as My Internal HDD (C:)
PostPosted: Wed May 20, 2009 8:12 pm 
Offline
Developer
User avatar

Joined: Thu Nov 01, 2007 12:44 pm
Posts: 554
Location: Saint Petersburg
ccfriel wrote:
Safely Remove 4.0.6.720 identifies my TEAC external USB Floppy Drive as my internal HDD (Local Drive C:).
The 'Device Name' is correctly identified, but all the Properties identify my internal HDD (Local Drive C:).

My WinXP SP2 'My Computer' correctly identifies the external floppy as Drive A: and the FDD functions properly, as does the Local HDD Drive C:.

Here is the Tech Information:
Sys_DeviceDescription: TEAC USB Floppy
Sys_LocationInformation:
Sys_DeviceInstance: 45068
Sys_DevicePnPName: USB\VID_0644&PID_0000\7&2F0E7CF0&0&5
Sys_FriendlyName: TEAC FD-05PUW USB Device
Sys_HardwareID:
Sys_DriveLetter: C:
Sys_VolumeLabel: Local Drive
Sys_ulProblemNumber: 0
Sys_BusType: BusTypeUsb
Internal_DontShowThisDevice: False
Internal_IgnoreStopAllCommand: False
Internal_ImageName: USB disk
Internal_Hotkey:
Internal_UserDeviceName: TEAC FD-05PUW USB Device
Internal_UserDeviceNameWithDriveLetters: TEAC FD-05PUW USB Device (C:)
Internal_IsCardReader: False
Internal_IsProbablyFixedDrive: False
Internal_DeviceIsDisabled: False
Internal_DeviceIsSafelyRemoved: False
Internal_DeviceWasDisabledByProgram: False
Sys_VolumesList:
#UniqueVolume number 1
VolumeName: \\?\Volume{9b40f05a-e693-11da-8729-806d6172696f}\
VolumeMountPoints: C:
VolumeInformation: VolumeLabel = Local Drive
VolumeSerialNo = $CCA6B0D9
MaxComponentLength = 255
FileSystemFlags = $700FF
FileSystemName = NTFS
debugGetVolumeInformationExecTime(Ticks) = 0
FriendlyName: TEAC FD-05PUW USB Device
MediaType: 12
###
Internal_PhysicalDeviceLink:
------- Physical Device, level 1 ------
DeviceInst=45068
PnPName=USB\VID_0644&PID_0000\7&2F0E7CF0&0&5
FriendlyName=
DEVICEDESC=TEAC USB Floppy
LOCATION_INFORMATION=
HARDWAREID=
SPDRP_CLASSGUID={36FC9E60-C465-11CF-8056-444553540000}
ParentDeviceInst=7576
ParentDevicePnPName=USB\VID_2001&PID_F103\6&5F5A822&0&1
ulStatus=$0180600A
ulProblemNumber=0
Capabilities=$00000004
DN_REMOVABLE_Flag=True
DN_DISABLEABLE_Flag=True
DN_WILL_BE_REMOVED_Flag=False
DN_HAS_PROBLEM_Flag=False
DN_LIAR_Flag=False
CM_DEVCAP_SURPRISEREMOVALOK_Flag=False
CM_DEVCAP_DOCKDEVICE_Flag=False
CM_DEVCAP_REMOVABLE_Flag=True
CM_PROB_DEVICE_NOT_THERE_Flag=False
SPDRP_PHYSICAL_DEVICE_OBJECT_NAME=\Device\USBPDO-12
SPDRP_UI_NUMBER=0
BusType=BusTypeUsb
DeviceType=Unknown device type (0)
DeviceNumber=0
------- Physical Device, level 2 ------
DeviceInst=51544
PnPName=USBSTOR\SFLOPPY&VEN_TEAC&PROD_FD-05PUW&REV_3000\8&AF65C2F&0
FriendlyName=TEAC FD-05PUW USB Device
DEVICEDESC=
LOCATION_INFORMATION=
HARDWAREID=
SPDRP_CLASSGUID={4D36E980-E325-11CE-BFC1-08002BE10318}
ParentDeviceInst=45068
ParentDevicePnPName=USB\VID_0644&PID_0000\7&2F0E7CF0&0&5
ulStatus=$0180200A
ulProblemNumber=0
Capabilities=$00000000
DN_REMOVABLE_Flag=False
DN_DISABLEABLE_Flag=True
DN_WILL_BE_REMOVED_Flag=False
DN_HAS_PROBLEM_Flag=False
DN_LIAR_Flag=False
CM_DEVCAP_SURPRISEREMOVALOK_Flag=False
CM_DEVCAP_DOCKDEVICE_Flag=False
CM_DEVCAP_REMOVABLE_Flag=False
CM_PROB_DEVICE_NOT_THERE_Flag=False
SPDRP_PHYSICAL_DEVICE_OBJECT_NAME=\Device\000000bd
SPDRP_UI_NUMBER=0
BusType=BusTypeUsb
DeviceType=FILE_DEVICE_DISK
DeviceNumber=0
DevicePath#0=\\?\usbstor#sfloppy&ven_teac&prod_fd-05puw&rev_3000#8&af65c2f&0#{53f56311-b6bf-11d0-94f2-00a0c91efb8b}
MountPoints=C:


Hello,

You may try our new version:
http://safelyremove.com/upload/usbsafel ... ta4pre.exe

We have fixed this bug there so you can see if it works for you.


Top
 Profile  
 
 Post subject: Re: Safely Remove 4.0 Identifies My TEAC External USB Floppy as My Internal HDD (C:)
PostPosted: Thu May 21, 2009 8:09 am 
Offline

Joined: Fri Apr 03, 2009 8:47 am
Posts: 3
Igor wrote:
Hello,

You may try our new version:
http://safelyremove.com/upload/usbsafel ... ta4pre.exe

We have fixed this bug there so you can see if it works for you.


Is that version safe to install on top of the 4.1 beta 3?
And do you have a changelog for this one?


Top
 Profile  
 
 Post subject: Re: Safely Remove 4.0 Identifies My TEAC External USB Floppy as My Internal HDD (C:)
PostPosted: Thu May 21, 2009 10:10 am 
Offline
Developer
User avatar

Joined: Thu Nov 01, 2007 12:44 pm
Posts: 554
Location: Saint Petersburg
Number99 wrote:
Igor wrote:
Hello,

You may try our new version:
http://safelyremove.com/upload/usbsafel ... ta4pre.exe

We have fixed this bug there so you can see if it works for you.


Is that version safe to install on top of the 4.1 beta 3?
And do you have a changelog for this one?

It is still a testing version however it's enough stable (it may contain some minor bugs, but no more) so, yes, you can install it on top of the 4.1 beta 3.

The changelog comes with the installator, after you have installed the program open USB Safely Remove program dir and find there History.txt file. It's a change log.

BTW the mentioned bug was fixed in 4.1 beta 3 yet, so I just wanted to know if we didn't broke something in 4.1 beta 4. Also I wonder if you still encounter the mentioned problem with 4.1 beta 3?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Crystal Rich Ltd © 2014 Powered by phpBB ©