Multi-partitioned HDD, safely remove [SOLVED]

Post Reply
bawldiggle
Posts: 25
Joined: Jun 15th, 2013, 9:47 pm

Multi-partitioned HDD, safely remove [SOLVED]

Post by bawldiggle »

I have a new mains-powered external USB HDD with 3 partitions (all for data only)
- unit is NOT off the shelf external HDD ... separate enclosure -PLUS- WD Blue 500GB disc
- disc-enclosure is USB3 but all laptop ports are USB2 only
- all partitions are NTFS

USB Safely Remove lists all 3 partitions as separate drives (obviously).
- to disconnect the HDD I safely-remove the first partition/drive and then pull the plug
- the HDD is intentionally empty until I am sure of procedures to USB Safely Remove the device.

Thank you,


USB Safely Remove has been the one of the best purchases I have ever made. :D
- worth every cent/penny/dollar
- Windows Safely Remove is frustrating when multiple USB sticks and all that is shown are drive letters
Last edited by bawldiggle on Nov 5th, 2014, 11:35 pm, edited 1 time in total.
User avatar
Igor
Developer
Posts: 602
Joined: Nov 1st, 2007, 12:44 pm
Location: Saint Petersburg
Contact:

Re: Multi-partitioned HDD, safely remove

Post by Igor »

bawldiggle,
Thanks for your nice words!

I'm not sure I understand what's your question or problem. What behavior of the program are you expecting?
bawldiggle
Posts: 25
Joined: Jun 15th, 2013, 9:47 pm

Re: Multi-partitioned HDD, safely remove

Post by bawldiggle »

My experience has only ever been with USB thumb-drives and USB pocket drives.
In USB Safely Remove each device has only been one drive .
- so safely removing has only been represented by one drive letter.

Now I have a new external USB HDD, with 3 partitions
- one primary partition and two logical partitions.
- ie, drive letters J, K, L

When I open USB Safely Remove all three drives ... J, K, L are listed for safe removal
- but all those drives (J, K, L) are on one HDD device

How do I ensure a safe removal of the new HDD device if only one drive (partition) is "released"
- or should I safely release all drives/partitions on the HDD before disconnecting the HDD device from the USB port.
Techland
Posts: 43
Joined: Aug 23rd, 2010, 2:07 am

Re: Multi-partitioned HDD, safely remove

Post by Techland »

What you describe makes no sense to me. If you click on the drive symbol to the left all 'partitions' are ejected. IMHO it is not possible to eject only one partition - always the whole drive. Did you ever try this?
User avatar
Igor
Developer
Posts: 602
Joined: Nov 1st, 2007, 12:44 pm
Location: Saint Petersburg
Contact:

Re: Multi-partitioned HDD, safely remove

Post by Igor »

bawldiggle,
Thanks for the explanation of the issue. Can you send me the following additional information:
1. The report from the program. In order to send the report you should proceed to "Main menu -> Help -> Report a bug", and in the opened dialog enter your e-mail, the link to this topic.
2. The screenshot of the device menu with the drive split into three devices. Please highlight these devices or just list their drive letters.
bawldiggle
Posts: 25
Joined: Jun 15th, 2013, 9:47 pm

Re: Multi-partitioned HDD, safely remove

Post by bawldiggle »

@ Techland
If you click on the drive symbol to the left all 'partitions' are ejected
The left of "what" ?
The only active "links" in the USB Safely Remove popup window are the partition/drive labels, and I can only click them one at a time.
There is no clickable "item" that represents the device, only the multiple partitions on the device are clickable.
popup.png
popup.png (13.88 KiB) Viewed 111876 times
bawldiggle
Posts: 25
Joined: Jun 15th, 2013, 9:47 pm

Re: Multi-partitioned HDD, safely remove

Post by bawldiggle »

Hi Igor

I only want to be sure I am safely removing a device that has multiple partitions ... drive letters

1. Report has been sent

2. Images
popup.png
popup.png (13.88 KiB) Viewed 111876 times
Disk management.PNG
Disk management.PNG (16.29 KiB) Viewed 111876 times
bawldiggle
Posts: 25
Joined: Jun 15th, 2013, 9:47 pm

Re: Multi-partitioned HDD, safely remove

Post by bawldiggle »

I think I might have discovered part of the answer to my question
- when I clicked on one of the drives the "released" popup lists all drives/partitions on the storage device
- in this case E and F
discovery.png
discovery.png (16.26 KiB) Viewed 111875 times
Does USB Safely Remove check the status of all drives/partitions on the device ... or only the "clicked" drive/partition ?
- eg, if I clicked on E and F was still be written too, would USB Safely Remove detect F is still being written to ?
User avatar
Igor
Developer
Posts: 602
Joined: Nov 1st, 2007, 12:44 pm
Location: Saint Petersburg
Contact:

Re: Multi-partitioned HDD, safely remove

Post by Igor »

bawldiggle,
Thanks for thorough explanation!

When you click to any drive of such multipartitioned disk the whole device will be safely removed. So there's no difference where to click to remove the device: to a drive item or to a device (e.g. to the device caption). But things different for devices with media such as card-reader, DVD-ROMs etc. For this devices clicking to the drive will either eject a partial card or DVD tray while clicking to the device will prepare the whole device to be removed.
bawldiggle
Posts: 25
Joined: Jun 15th, 2013, 9:47 pm

Re: Multi-partitioned HDD, safely remove

Post by bawldiggle »

Thank you Igor :)
bawldiggle
Posts: 25
Joined: Jun 15th, 2013, 9:47 pm

Re: Multi-partitioned HDD, safely remove

Post by bawldiggle »

@ Techland :)

I owe you an apology :oops: :oops:

Just discovered the device icon is "alive".
- I had assumed the device-icon would behave the same as partition/drive when pointed to.
- change of appearance (and the green magnifier shows) when pointed to

When I click the device icon "to the left" USB-Safely Remove does start the eject process
- you were right

Thank you for your advice :)
icon is clickable.png
icon is clickable.png (14.2 KiB) Viewed 111865 times
Techland
Posts: 43
Joined: Aug 23rd, 2010, 2:07 am

Re: Multi-partitioned HDD, safely remove [SOLVED]

Post by Techland »

No apology needed! :D
Post Reply